SM-G986N BIT5 Debug File

Fix Your Samsung Galaxy with Our Tested Debug File: Exclusive to Gssamc.com

Is your Samsung Galaxy device unresponsive or stuck in a boot loop? If you're struggling with a dead boot issue, Gssamc.com has a solution tailored for you. We offer a tested debug file specifically designed to address these common problems and more. Here’s how this powerful tool can restore your device and what you need to do to use it effectively.

Why Use Our Tested Debug File?

Our debug file is crafted to handle a range of issues, ensuring your device returns to its optimal performance. Here's what it can do:

- Revive a Dead Device: If your Galaxy is unresponsive or stuck in a boot loop, our debug file can help you perform a dead boot repair.
- Restore Corrupted Boot Files: Fix corrupted boot files to ensure that your device boots up smoothly and operates as intended.
- Resolve Flash Token Issues: Address flash token problems that might be disrupting your firmware updates.
- Repair or Restore IMEI: Correct or restore your device’s IMEI for proper network connectivity and identification.
- Retrieve Original IMEI: If your IMEI has been altered or corrupted, our file can help you retrieve the original one.
- Unlock Your Device: Remove carrier restrictions to give you the freedom to switch networks as needed.

How to Download and Use the Debug File

1. Download the Debug File:
  - Visit Gssamc.com to download the tested debug file tailored for your Samsung Galaxy device.

2. Prepare Your Computer:
  - Install QFIL: Download and install Qualcomm Flash Image Loader (QFIL) on your PC.
  - Install Qualcomm Drivers: Ensure you have the necessary Qualcomm drivers installed to facilitate communication between your PC and device.

3. Prepare the Debug File:
  - Download and Extract: Obtain the attached unbrick tool and extract it to a known location on your computer.

4. Boot Your Device into EDL Mode:
  - Turn Off Your Device: Ensure the device is completely powered off.
  - Enter EDL Mode: Press and hold both the volume up and volume down buttons simultaneously.
  - Connect to PC: While holding the buttons, connect your device to your PC via a USB cable. Your device should enter EDL mode.
  - Note: If your device does not enter EDL mode, you may need to use a test point or EDL cable.

5. Launch and Configure QFIL:
  - Open QFIL: Start the QFIL application.
  - Load the Unbrick Tool: In QFIL, click the "Flat Build" button and select the unbrick tool you downloaded.
  - Configure QFIL:
    - Programmer File: Click "Browse" and locate the `Prog-firehose-ddr.elf` file from the firmware folder.
    - Load XML Files: Click "Load XML" and choose `rawprogram` and `patch` XML files.
  - Set QFIL Settings: Select UFS as the memory type and choose "Reset After Download."

6. Start the Flashing Process:
  - Click the "Download" button in QFIL to initiate the flashing process. This step will rewrite the necessary files to fix your device.

7. Post-Flash Actions:
  - Enter Download Mode: Once flashing is complete, your device should automatically start in Download Mode.
  - Flash Latest Firmware: Use ODIN to flash the latest firmware to ensure your device is up-to-date and functioning correctly.

8. (Optional) Read Firmware:
  - Connect in EDL Mode: Connect your device again in EDL mode.
  - Run Script: Execute the `read-firmware.bat` script to read and verify the firmware if necessary.

Important Disclaimer

- For Dead Boot Repair Only: This file is designed exclusively for dead boot repair and reprogramming. Do not use it on a functioning device.
- Use at Your Own Risk: Proceed with caution as modifying and flashing firmware carries risks. Ensure you’re using the correct file version for your device.
- File Suitability: This file is intended for specific versions and conditions. Adjustments may be needed for different versions.

Download the debug file now from Gssamc.com and take the first step towards fixing your Samsung Galaxy device. Revive your device and restore its functionality with our tested solution!